Deep Impact Ouserts
41 reviews
Confidence Starts Here.
Trusted when the moment matters most.
Quantity per pack is 1 dozen.
The Deep Impact Outserts, manufactured by the reputable brand Black Eagle, are durable and high-performance components designed for archery enthusiasts. These outserts come in various sizes, including Deep Impact 300, 350, 400, and 500, ensuring compatibility with different arrow shafts. Made from premium materials, these outserts offer exceptional strength and stability, significantly improving accuracy and performance. With their precision engineering and easy installation, the Deep Impact Outserts are a must-have for any serious archer. Elevate your archery game with Black Eagle's Deep Impact Outserts and experience top-notch quality and performance.
The Deep Impact Outsert Weights are as follows:
-
250 Spine = 42 Grains
300 Spine = 40 Grains
350 Spine = 42 Grains
400 Spine = 42 Grains
500 Spine = 44 Grains
600 Spine = 46 Grains
To install the outsert.
- Select the right outsert for the right shaft.
- Dry fitting is recommended on all components. Slide Outserts over shaft and spin test (if you prefer)
- If Outserts does not fit, that is OK. Get some 100 grit sandpaper and lightly sand the shaft in a circular motion until the insert fits snugly on the shaft. Start slowly so you don't remove too much of the arrow.
- Wipe dust off of the shaft with a clean paper towel. (No Cleaners are recommended.)
- Again, spin test to ensure concentricity. Rotate the outsert until it spins perfectly.
- Use a silver or black Sharpie and mark the shaft and the outsert for perfect alignment once glue is applied.
- We have tested our fletching glue, insert/outsert glue, and epoxy, and all of them work great.
- Apply an even amount of glue around the shaft to ensure the glue channels get enough glue in them to hold.
- Once the outsert is glued on, stand the arrow on the nock end to dry.
