QTY IS 1 DOZEN:
Introducing the Deep Impact Front Of Center Outsert System F.O.C.O.S by Black Eagle, the perfect addition to enhance your archery game. This innovative product is designed to maximize accuracy and performance. Crafted with precision, it offers exceptional features such as outsert sizes available in Deep Impact 300, 350, 400, and 500, catering to various arrow needs. Choose between stainless steel and 7075 T6 aluminum metal types for durability and strength. With its superior quality and unique selling points, the Deep Impact Front Of Center Outsert System F.O.C.O.S is a must-have component for any serious archer..
12 FOCOS Retention Screws
Insertion Depth of Arrow in Outsert is .610 almost 5/8"
Outsert adds Approximately 1.090" to end of the Arrow
ALUMINUM OUTSERTS TOTAL WEIGHT
ALL SPINES WEIGH 80 Grains
STAINLESS STEEL OUTSERTS TOTAL WEIGHT
ALL SPINES WEIGH 100 Grains
- To install the F.O.C.O.S System
- Select the right outsert for the right shaft.
- Glue in Stainless steel retention Post
- Dry fitting is recommended on all components. Slide Outserts over shaft and spin test (if you prefer)
- If Outserts does not fit that is OK. Get some 100 Grit sand paper and lightly sand the shaft in a circular motion until the outsert fits fairly snug on shaft. Start slowly so you don't remove to much off the arrow.
- You should have approximately 3/4 of an inch insertion on Aluminum Outserts
- Wipe dust off of the shaft with Clean paper towel. (No Cleaners are recommended)
- Again, Spin test to ensure concentricity.
- Use a Silver or Black Sharpie and mark the Shaft and the Outsert for perfect alignment
- Slide outsert over shaft and use the 3/32 Head retention Screw and Lock the Outsert in place!
- If using glue See steps 11-15 .
- We have tested Our fletching glue, insert/outsert glue and epoxy and all of them work great.
- Apply a even amount of glue around the shaft to ensure you get enough glue in them to hold.
- Slide Outsert On shaft rotating to make sure Glue/Epoxy is evenly dispersed
- Use the 3/32 Head retention Screw and Lock the Outsert in place!
- Once The outsert is glued on Screw is installed stand the arrow on the nock end to dry.
20 Reviews
-
Awesome: the FOCOS
Love the quality and finish on the outserts and the inserts are 0 tolerance when fitting the shaft! Product looks super durable. Can’t wait to to shoot some new sticks!
-
Focos outsert system
Love it! All of the parts were close tolerance thus fit together as if glued. After about 40 shots at 20 yards for zero, the outsert I decided not to glue on were still fastened tightly and all spin tested perfectly.
-
nice top quality product
Review body is empty
-
Customer review
Review body is empty
-
F. O. C. O. S outserts
These outsert are great. My lighted nocks were just enough to throw my arrow flight off. I switched to the 100gr. F. O. C. O. S and cured the issues. I highly recommend them.
-
Good system
Totally love how easy it is to customize your front end weight plus the easy ability of lining vanes with broadheads
-
Customer review
Review body is empty
-
Customer review
Review body is empty
