Description
To install the Half-Out.
- Square the end of the arrow shaft
- Dry fitting is recommended on all components. Slide half-out in shaft and spin test (if you prefer)
- If a slight wobble is noticed, DON'T PANIC! Rotate the half-out with the field point installed until the spin is true.
- Again, rotate half-out until it spins perfectly.
- Use a silver or black Sharpie and mark the shaft and the half-out for perfect alignment once glue is applied.
- We have tested our fletching glue, insert/outsert glue, and epoxy, and all of them work great.
- Apply an even amount of glue around the shaft of the Half-Out to ensure the glue channels get enough glue in them to hold.
- Once the glued half-out is finished, stand the arrow on the point to dry.
Reviews
36 Reviews
-
Renegade stainless
The halfout inserts are as described and work great in 5mm arrows. Replaced all of my aluminum inserts with the stainless inserts. Highly recommend
-
Needs to fit a little tighter in the rampage arrow
Same as above
-
Inserts
I like them so far , very strong, maybe could try to incorporate a 1/8 over shaft collar on them to help with severe impact fatigue.
-
Half Out.
Ordered Friday, had them Saturday... Incredible for $5.00 shipping. As the other review notes, the diameter at the arrow shaft could be tighter in tolerance, but great product overall.
-
Rampage Inserts
The inserts made by Black Eagle Arrows are fantastic. They penetrate deep and weigh the correct weight.
-
55GR SS HALF-OUT
Very good durable product. Only suggestion I would make is to get the tolerances closer for the outside diameter so that the half-out transitions to the shaft seamlessly. Other than that it is a great product that is consistent in weight and spin testing.
-
Not what I was expecting as and half out.
Review body is empty
-
Customer review
Perfect transaction
-
recent order
Review body is empty
