-
Screw-In Arrow Field Point
$13.99Quantity per pack 12 These Precision Screw-In Bullet Points are perfect for target & 3D shooting. The 5/16 are designed to work with all our arrow shafts inserts and outserts. The 11/32" Are... -
Rampage and Renegade Screw-In Brass Insert Weight
$19.99Quantity per pack 12 These screw-in brass weights fit our Rampage and renegade threaded Half-Outs. These weights are for fine adjustments available in 30, 50, and 75 grains and are stackable for... -
Weight Adjustment Tool
$16.99Our new weight Adjusting tool is made to fit all our arrows with the exception of Deep, X Impacts and FOCOS Systems. With a hardened hex head this carbon powered weight tool is designed to be... -
Nock Collars
$19.99Nock Collars Black Eagle Arrows Nock Collars are designed to protect the nock end of the arrow. They are made of aluminum that will not wear out or break down over time. The collars are also easy to...
Description
To install the Half-Out.
17 SERIES | 5 MM | SMALL DIAMETER
Spine Sorted | Straightness Sorted | Weight Sorted | Battle Proven
Renegade Fletched Arrows
Our Renegade fletched arrows are the industry leading choice for hunters and archers alike. With unmatched tolerances, spine sorted, and weight sorted. Our renegade arrows are sure to give you the edge you need to take down your next big game.
These arrows are perfect for hunters of all skill levels, and are sure to provide you with years of reliable performance.
**Features:**
- Unmatched tolerances
- Spine sorted
- Weight sorted
**Benefits:**
- Increased accuracy
- Improved consistency
- Greater range
- More lethal impact
**Instructions:**
- Be sure to use the correct spine and weight arrow for your bow.
- Practice regularly to improve your accuracy.
.005" Straightness or Straighter
± 2 Grain Weight Tolerance
32.5" Shaft Length
FLETCHED ARROWS INCLUDE:
- Black Eagle Arrows "R" Nock 10 -Orange- Grains
- Stainless Steel Bone Crushing Half-Outs - 52 Grains
- 2" Q2I Rapt-X Vanes | Orange, Yellow - 22.5 Grains
- Shipped in Renegade Box
To install the Half-Out.
- Square the end of the arrow shaft
- Dry fitting is recommended on all components. Slide half-out in shaft and spin test (if you prefer)
- If a slight wobble is noticed, DON'T PANIC! Rotate the half-out with field point installed until the spin is true.
- Again, Rotate Half-Out until it spins perfect.
- Use a Silver or Black Sharpie and mark the Shaft and the Half-Out for perfect alignment once glue is applied.
- We have tested Our fletching glue, insert/outsert glue and epoxy and all of them work great.
- Apply a even amount of glue around the shaft of the Half-Out to ensure the glue channels get enough glue in them to hold.
- Once the glued half-out is finished stand the arrow on the point to dry.
Specifications
Not sure what size is right for you. Check out our sizing chart.
| Spine | Inner Diameter | Outer Diameter | GPI |
|---|---|---|---|
| 250 | .204 | .280 | 10.8 |
| 300 | .204 | .275 | 10 |
| 350 | .204 | .267 | 8.7 |
| 400 | .204 | .263 | 8 |
Hot Melt is NOT recommended for use with Black Eagle Arrow shafts.
NO Cleaner for Outside or Inside the shaft is recommended! Use Q-Tip or Paper towel.