(NEW) X Impact Front Of Center Outsert System 2.0
SKU: X-IMP-FOCOS-2.0
Black Eagle Arrows

(NEW) X Impact Front Of Center Outsert System 2.0

$48.99
(NEW) Front Of Center Outsert System 2.0  (Patent#US10203185)

Quantity per pack 12

Introducing the all NEW X-Impact F.O.C.O.S 2.0. This revolutionary product was redesigned to enhance the performance of your X Impact Arrows. We made the outserts, Smaller, Lighter and no sanding is required, it slips over the shaft. Made with high-quality 7075 T6 aluminum, it offers unmatched durability and strength. Elevate your archery game with the X-Impact Front Of Center Outsert System F.O.C.O.S 2.0.

The F.O.C.O.S is made of 3 parts. One is the black anodized 7075 T6 aluminum alloy outsert. Two is the Aluminum retention Post that also acts as a footer inside the shaft. The third part is the 3/32 allen head retention screw that allows for the Outserts to be aligned to your broadhead to ensure the most accurate flight. This system has been tested to over 550 Pounds per square inch of pull and they stay on! If you are looking for maximum penetration, Maximum F.O.C and shot after shot performance then the deadly combination of the X-Impact shafts/arrows and the F.O.C.O.S 2.0 are sure to be a hit!

Insertion Depth of Arrow in Outsert is .420"
Outsert adds Approximately .90" to end of the Arrow

 
The Deep Impact & X-Impact Outsert Weights are a Follows:

ALUMINUM OUTSERTS TOTAL WEIGHT
ALL SPINES WEIGH Approximately 56 Grains

Want to add more weight for more FOC? Click here
          To install the F.O.C.O.S System

 

        1. Select the right outsert for the right shaft.
        2. Glue in Aluminum retention Post
        3. Dry fitting is recommended on all components. Slide Outserts over shaft and spin test (if you prefer)
        4. You should have approximately .420" of an inch insertion on Aluminum Outserts.
        5. Insert 3/32 Set screw to hold outsert and align vanes to broadhead if you prefer.
        6. Again, Spin test to ensure concentricity.
        7. Tighten the 3/32 Head retention Screw and Lock the Outsert in place!
Full Description
Qty
  • Description
    (NEW) Front Of Center Outsert System 2.0  (Patent#US10203185)

    Quantity per pack 12

    Introducing the all NEW X-Impact F.O.C.O.S 2.0. This revolutionary product was redesigned to enhance the performance of your X Impact Arrows. We made the outserts, Smaller, Lighter and no sanding is required, it slips over the shaft. Made with high-quality 7075 T6 aluminum, it offers unmatched durability and strength. Elevate your archery game with the X-Impact Front Of Center Outsert System F.O.C.O.S 2.0.

    The F.O.C.O.S is made of 3 parts. One is the black anodized 7075 T6 aluminum alloy outsert. Two is the Aluminum retention Post that also acts as a footer inside the shaft. The third part is the 3/32 allen head retention screw that allows for the Outserts to be aligned to your broadhead to ensure the most accurate flight. This system has been tested to over 550 Pounds per square inch of pull and they stay on! If you are looking for maximum penetration, Maximum F.O.C and shot after shot performance then the deadly combination of the X-Impact shafts/arrows and the F.O.C.O.S 2.0 are sure to be a hit!

    Insertion Depth of Arrow in Outsert is .420"
    Outsert adds Approximately .90" to end of the Arrow

     
    The Deep Impact & X-Impact Outsert Weights are a Follows:

    ALUMINUM OUTSERTS TOTAL WEIGHT
    ALL SPINES WEIGH Approximately 56 Grains

    Want to add more weight for more FOC? Click here
            To install the F.O.C.O.S System

     

          1. Select the right outsert for the right shaft.
          2. Glue in Aluminum retention Post
          3. Dry fitting is recommended on all components. Slide Outserts over shaft and spin test (if you prefer)
          4. You should have approximately .420" of an inch insertion on Aluminum Outserts.
          5. Insert 3/32 Set screw to hold outsert and align vanes to broadhead if you prefer.
          6. Again, Spin test to ensure concentricity.
          7. Tighten the 3/32 Head retention Screw and Lock the Outsert in place!
  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    SKU: X-IMP-FOCOS-2.0
    Availability: If Item Can't be ordered it is out of Stock