/
Sale

Black Eagle Arrows

X Impact Front Of Center Outsert System F.O.C.O.S (CLEARANCE)

(43 reviews) Write a Review
$48.99
$25.00
SKU:
X-IMP-FOCOS
Availability:
If Item Can't be ordered it is out of Stock
Adding to cart… The item has been added

Description

Front Of Center Outsert System (Patent#US10203185)

X Impact Front Of Center Outsert System F.O.C.O.S (Patented)
Introducing the X-Impact Front Of Center Outsert System F.O.C.O.S (Patented) by Black Eagle. This revolutionary product is designed to enhance the performance of your arrow components. Made with high-quality materials like stainless steel and 7075 T6 aluminum, it offers unmatched durability and strength. Elevate your archery game with the X-Impact Front Of Center Outsert System F.O.C.O.S (Patented) by Black Eagle.


 The F.O.C.O.S is made of 3 parts. One is the black anodized 7075 T6 aluminum alloy outsert or Stainless Steel Option. Two is a Stainless steel Retention post In The Aluminum Outsert Model and Aluminum in the Stainless Steel Outsert Model that also acts as a footer inside the shaft. The third part is the 3/32 allen head retention screw that allows for the Outserts to either be screwed or screwed and glued.(Not Tattooed) This system has been tested to over 550 Pounds per square inch of pull and they stay on! If you are looking for maximum penetration, Maximum F.O.C and shot after shot performance then the deadly combination of the Deep Impact, Instinct or X-Impact shafts then the F.O.C.O.S are sure to be a hit!

Insertion Depth of Arrow in Outsert is .610 almost 5/8"
Outsert adds Approximately 1.090" to end of the Arrow

The Deep Impact & X-Impact Outsert Weights are a Follows:

ALUMINUM OUTSERTS TOTAL WEIGHT
ALL SPINES WEIGH 80 Grains

STAINLESS STEEL OUTSERTS TOTAL WEIGHT
ALL SPINES WEIGH 100 Grains

 

  1. Select the right outsert for the right shaft.
  2. Glue in Stainless steel retention Post
  3. Dry fitting is recommended on all components. Slide Outserts over shaft and spin test (if you prefer)
  4. If Outserts does not fit that is OK. Get some 100 Grit sand paper and lightly sand the shaft in a circular motion until the outsert fits fairly snug on shaft. Start slowly so you don't remove to much off the arrow.
  5. You should have approximately 3/4 of an inch insertion on Aluminum Outserts
  6. Wipe dust off of the shaft with Clean paper towel. (No Cleaners are recommended)
  7. Again, Spin test to ensure concentricity.
  8. Use a Silver or Black Sharpie and mark the Shaft and the Outsert for perfect alignment
  9. Slide outsert over shaft and use the 3/32 Head retention Screw and Lock the Outsert in place!
  10. If using glue See steps 11-15 .
  11. We have tested Our fletching glue, insert/outsert glue and epoxy and all of them work great.
  12. Apply a even amount of glue around the shaft to ensure you get enough glue in them to hold.
  13. Slide Outsert On shaft rotating to make sure Glue/Epoxy is evenly dispersed
  14. Use the 3/32 Head retention Screw and Lock the Outsert in place!
  15. Once The outsert is glued on Screw is installed stand the arrow on the nock end to dry.

Reviews

43 Reviews

  • 5
    Stainless steel outsert

    Posted by Michael Clark on Apr 18th 2021

    Wow, what a difference these make, great way to help control weight and make an already tuff arrow nearly Indestructible

  • 4
    FOCOS System

    Posted by Ryan R Ellison on Sep 28th 2020

    Easy to install, light sanding required for a few of the impact collars, very satisfied.

  • 5
    F.O.C.O.S outsert system

    Posted by Harry Reed on Sep 26th 2020

    This system is hands down the best I have used. You can align your broadheads if you wish if mess one up rock/tree etc. screw on a new one and be on your way. Very innovative

  • 5
    Very good outserts and online experience

    Posted by Jeff Finn on Sep 25th 2020

    Have been using these outserts for about a year. Shopping experience is good/quick and delivery was very fast. Thanks

  • 5
    Tip weight

    Posted by Ullysses Suarez on Aug 30th 2020

    Great system! I highly recommend it

  • 5
    FOCUS INSERT/OUTSERT

    Posted by Andrew Brakke on May 27th 2020

    Recently built a set of Black Eagle X Impact 250 Spine with 80G FOCUS SYSTEM. Awesome product! Durable, Spins True, Amazing FOC. Throwing 100G QAD Exodus Head on them....Hits like a Hammer. Excited for elk season here in WA.

  • 5
    X-Impact FOCOS

    Posted by Robert Henderson on Apr 19th 2020

    Super happy with the purchase. Shipping was super fast and exactly as I ordered. Product was exactly as described and flys awesome out of my VXR.

  • 5
    F.O.C.O.S System

    Posted by William Vega on Mar 9th 2020

    Excellent product, Extremely fast shipping!

  • 4
    Good system

    Posted by Jeff T on Mar 8th 2020

    It took me a while to get my arrows built with these. I had to sand each arrow to get the system to fit . So far so good.